Traveller Gimbal schematic

Sandr

Thank you for great idea!
An your Work.

I have already buy and make all parts for https://www.basecamelectronics.com/traveller_gimbal/
But where schematics for wiring?

How i need connect PSP1000 button to SimpleBGC 32-bit Tiny?

Please post schematic.

With best regards Sandr

AndrewSupport

Hello,
May be you mean PSP1000 joystick...
Pinout of joystick: http://ybex.com/d/2pt47f205nc0ab9cr4aide3fvr61whhl39ooli6v.html
"Up/down" and "left/right" axises should be conected to analog inputs of SBGC board.
Analog inputs of Tiny revB board: http://ybex.com/d/1hbn78ash9zt5siax0vhv7qk74udgkzlp48rdm90.html

Sandr

After complete assembly and sensor calibration
Get some strange result...
https://photos.app.goo.gl/44wrF2CvJCeBQw1u6

AndrewSupport

Hello,
Try to check correct rotation of motors, because internal connection of motor cable with windings (inside of motor) can be soldered in random order.
Remember or write down numbler of poles, push AUTO button in "Motor configuration" field: http://ybex.com/d/kaqcmb6br2cy13bxs6zilp1wftwx45jovcr9tja7.html
Firmware will determain correct rotation of motors and stop tuning. Check number of poles for each motor after that, and write result to the board.

Sandr

Good news !
Gimbal is work.....
There is Profile for Traveler Gimbal on 32-bit Tiny Revision B and 2.69b3 Firmware:
https://yadi.sk/d/tb_Dx8m4YuNy9w

AndrewSupport

Hello,
Ok. This is good news!
Can we place your profiles to our article?

Sandr

Yes of course.

Also i make Parametric SolidWorks Model of Gimbal frame, this model can be adjust for different Cameras.
Like Sony Nex-5 etc....
I want to share Gimbal but i dont make handle model......
Can you share sources of handle model ?

AndrewSupport

yes, if you can provide 3d model file for us, we place this model to article too.

Howdy, Stranger!

Categories