Hi so i've just finished building my 3 axis gimbal but when i plug to my computer or turn it on it start twitching i'm using an BaseCam SimpleBGC 8-bit Set and i've updated the firmware from 2.4 b6 to 2.4 b8 but i still have the same problem this is my first time building a gimbal and here's a video and some photos of my settings youtube.com/watch?v=AunOMCxevlw&feature=youtu.be http://imgur.com/IXcrH9J http://imgur.com/xJNylLp http://imgur.com/C1TZXyc http://imgur.com/AKtpHc7
You need to read the manual. If you have a specific question after you have done that I am happy to help, but sorry I can not help if your only problem description is "it start twitching"
hi so i found the problem the basecam keep disconnecting every 3 second that's why i couldn't calibrate it i think the problem is from the usb driver or the software because all my usb port works