Today I have tired the new firmware 2.41b4. There is a problem. I found the "Yaw follow" is very slowly back to the center position and the angle of backing to the middle position is too big. So, I think the two functions is really necessary, just as follow: (1) Angle range limit of Yaw follow. (2) The speed of Yaw follow control. (Because sometime we need some quick follow )
Yes, I have read the instruction said "Follow speed rate is decreased 4x times, range is increased to 0..255..." But, how to increase speed and reduce the reaction angle of "Yaw follow "?
"Follow Dead band" is not the reaction angle of "Yaw follow ", it's the rotation of an outer frame does not affect the camera. For example, If I turn left a little quick, the camera is toward right, the reaction of the camera come back to the left is very slow, at the same time , the angle between the head and camera is a very large. When I stopped rotating , the camera will slowly move to the direction that I need. Maybe I can call it the Yaw response time is slow.