RC Settings - No action explanation
  • Hi,
    Have gimbal on my heli and when turn power on, yaw start slowly rotate whole heli on the ground. I set up in RC settings 3 step button. middle position is for starting and set NO ACTION. What I understand by meaning No action is NO POWER motors, right or so?. I would like no motor action (moving) on starting gimbal up, but whole 3 profiles are used. Is there workaround?

  • I think your PID for Yaw needs tuning, it should NOT slowly rotarte
  • try the trim button for the yaw axis on your radio...
  • Or trim in the rc tab of the gui
  • I had similar issue. Calibrated frame IMU gyro and problem disappeared!