Limting angle of camera
  • Is it possible to limit the camera angles relative to the onboard imu, I'm using it to stablise a light instead of a camera that is mounted on a car, I want to limit the angle of the light relative to the car (onboard imu) so that the light doesn't point at the bonnet.
  • to get an idea the car could be going up hill and therefore the angle limit that worked on flat ground, wouldnt take into account the angle of the hill and allow the light (camera) to point at the bonnet.
  • Hello,
    It is possible only in the encoder-enabled firmware. If you use encoder instead of the on-board IMU, you can set a working range.