Hi guys i have a problem with my 3 axis gimbal that i've built following this instructable guide ( http://www.instructables.com/id/OpenSAM-3D-Printed-Camera-Stabilizer/?ALLSTEPS ) the gimbal works but there is one problem that i couldn't solve it, the pitch axis keep twitching with or without the camera i tried deffrent cameras a but still the same problem here's a video and the settings of the gimbal hope you can help me thanks
do not activate joystick before the gimbal is working. You need to read the users manual, perform balancing and basic setup and then PIS tuning correctly.
I get the same problem only when it's hooked up to the PWM pitch line from the UAV... without this line and using the GUI I don't get any jerking... and it's only on the pitch axis...