Hi guys! Sorry, Im a complete newbie and I would appreciate any help. I think I have the latest alexmos board (blue board) and the simplebgc 1.0 Connection Diagram is confusing. How do I connect the power? Does it just go to the mainboard? the lines in the diagram are intersecting. Im not sure If I will just cut a wire and tap power for the 3rd axis. I hope I can get help. I could also put in some pictures to clarify my problem. Thanks!
Thanks! Yes I think Ill do that but right now Im confused because my third axis board doesnt come with a "daughter-board" - the small board that sits on top of my 3rd axis controller. Is it because my board is different?
you simply connect the 3rd axis 4pin jst connector to the main controller as shown in the diagram, be careful with the lid colors and u need to have a color diagram from the supplier like the above board. then u simply attach power cable from the main controller (+ -) signs to the battery.
Thanks for the help guys! Its all set, the board was made by iFlight and I was able to get a diagram similar to the one you posted above. Thanks again!!