HI Guys,

First i can connect to my board over usb and it´s working. But i cant adjust the YAW, it´s greyed out.

i have the 8bit controller with a soldered Extentionboard. However the Light at the imu is solid red,
the 2 on the main board are solid red and the green one after starting too for 3 sek andafter that it´s flashing sometimes.
the third on the extentionboard is solid yellowish.

My problem is that i cant make any thing on the YAW axis no pid and motor tuning. If somebody have any ideas please tell me if u need pictures or something tell me too.


The hardeware is from http://flyduino.net/Alex-Mos-Brushless-Gimbal-BLG.

Thanks SUWU