EN CN
Gyro Keeps spining Issues; 32 bit controller
  • seed2
    Hi Guys,

    I'm having some issues with my new 32bit controller IMU's. The Gyros keeps spinning on both the Yaw and the Pitch. I attached a video to better explain the issue. If you have any suggestions please tell me.

    Cheers,

  • Garug
    Where is your IMU when you do ACC calibration? It needs to be levelled well, components facing up.
  • kikojiu
    I had to reflash the board and calibrate everything from start. After a few days and having some problems installed the last version of FW. Also I had some HW problems with many many boards misleading me to SW errors when in fact they were HW errors. Try with another board if all I said doesn´t work. Good luck.
Add a Comment