EN CN
Help with Pitch
-
I m getting decent stable footage still needs a little tweaking but I have a question,
not in follow mode when I m shooting at head height the pitch starts to vibrate when i get to an extreme angle form having my hands lower then the head and rising the gimble.
I dont get vibration from nornal angles just when i get into these extreme angles so i m wondering if there are ways to soften those vibration only cause by on the edge of extreme, Of course i could always interview short people but aside from that alternative?
Could shot from bellow in follow mode but thats kinda ugly/odd.
Are there tweaks to settings to fix/help with my issue?
-
If possible strengthen the gimbal, make tubes as short as possible, make sure everything is thigh.
some times placing IMU on different spot helps too.
And you can always tune the PID in the worst position, then it will likely not perform as well on the normal position, but probably good enough.
32bit board with 2 IMUs should help on this too. What board FW are you using now?
Howdy, Stranger!
It looks like you're new here. If you want to get involved, click one of these buttons!