EN CN
Help... My pitch and yaw axis always goes back to level
  • rpuerto
    Help... My pitch and yaw axis always goes back to level. I need it to stay pitched or at my yaw without auto leveling.

    Any ideas?
  • Garug
    It is unclear what you need, a camera head or gimbal or both.

    Gimbal is supposed to go back to level, unless you command it otherwise by joystick or follow functionality.
  • rpuerto
    Garug, thank you for responding. We are using a BirdyCam 2 gimbal with a Hitec Minima 6E receiver controlled by a Hitec Flash 7 transmitter.

    Our left stick is controlling pitch and roll and the stick goes back to center once you let it go. I can roll the camera left and right without it going back to level, but if I pitch it down or up, it goes back to level. The right stick is controlling yaw by moving left and right, and it will also go back to level.

    I do have "Follow" disabled in the SimpleBgc settings.
  • eutico
    If you go to the RC settings, are you set to angle on those axes with this behavior? Try changing them to speed.
  • rpuerto
    Eutico , thanks. I will try that.
Add a Comment