EN CN
Shake shake shake..
  • andludo
    hello there,
    So I write you because I have a problem (like many) to adjust my Gimbal with 5dmk2 + sigma 20-40.

    My gimbal shakes whenever I handled it, especially the PITCH , the motor power is at 255, so it should be able to support the weight of the camera!

    A tutorial, particular configuration for the PID, motor configuration, advanced option, etc. ..?

    it worked very well on my 8bit controller before ... now with 32-bit is a disaster.

    thxxx

    PS: my gimbal is perfectly balanced and 2 are calibrated IMU.
  • Garug
    Too much power is not good. Try lowering the power.
  • andludo
    oh ok.. i thought if the gimbal made vibrations when i lean it, it was because there's not enough power
Add a Comment