CAN converters usually refer to devices that can realize interconnection between different CAN protocols or different physical layers. These converters are widely used in the fields of automotive electronics and industrial control to solve communication compatibility issues between different devices or systems. Here is some basic information and application scenarios about CAN converters:
Basic functions and features
https://www.cdebyte.com/Modem-CANBus
Protocol conversion:
Function: CAN converters can realize data exchange and conversion between different CAN protocols (such as CAN 2.0A/B, CAN FD, etc.).
Application: For example, controllers or sensors using different CAN protocols are connected to a unified CAN bus network to achieve seamless data communication.

Physical layer conversion:
Function: CAN converters can handle different physical layer interfaces, such as CAN high speed (ISO 11898-2), CAN low speed (ISO 11898-3), CAN FD, etc.
Application: Used to connect CAN devices with different physical layer interfaces, such as long-distance CAN communication, electrical isolation and environments with high anti-interference requirements.

Data format adaptation:
Function: Adapt and convert data formats and data rates between different devices to ensure the integrity and accuracy of data transmission.
Application: In a CAN network, different devices may use different data formats and rates, and the CAN converter can handle these differences and adapt.

Communication relay and enhancement:
Function: In complex CAN network topologies, as a communication relay or signal booster, it can extend the communication distance and enhance the stability of data transmission.
Application: For example, in large vehicles or industrial equipment, where long distances or noisy environments need to be crossed, CAN converters are used to enhance signals and ensure reliable data transmission.

Multi-channel management:
Function: Supports the management and integration of multiple CAN channels, allowing multiple devices to be connected to the same CAN bus or network at the same time.
Application: In complex vehicle systems or industrial control systems, multiple CAN channels can be managed and optimized through CAN converters to improve the overall efficiency and reliability of the system.