EN CN
YAW Drift even if sensor is on the table
  • brianchambers
    If I stick the sensor to a table and calibrate ACC and Gyro my YAW sensor drifts left very slowly.

    Here is a video of what happens when I calibrate to my table (I assure you my table isn't slowly spinning).


    I am at a total loss here.
  • Garug
    The sensor must be absolutely still when calibration gyro. Gyro and ACC calibration are different procedures and they are different sensors. . If calibrate at startup is activated, it must be still every time the board is powered and shortly after it to calibrate gyro correctly.

    Note: the controller is powered each time Battery or USB is connected.

    BTW, where are your white arrows. Do you have yaw only activated? is it really 12 poles? but that does not affect drifting.
Add a Comment