Another day wasted trying to program the iflight simple bgc 32bit with 2 imu's...

The imu's are reversed somehow in the software, I've tried every reset, tried one at a time, the frame imu thinks it is the camera imu and the camera thinks it's the frame imu, but the imu that says "camera" on it does not pass the signal through to the second imu, so it can't be connected as the camera imu.

The iflight set is installed in marked aluminum cases that say camera imu and frame imu, we'll at first everything seemed to be normal, but as I was trying to get the damned things calibrated I noticed the pitch was vertical and not moving, so I moved the whole frame and it started moving, the IMU's had switched!

Has anyone had this happen before? Does anyone in the U.S. Offer assistance in troubleshooting this stuff?