What is the max power supply voltage for the 32-bit boards
  • Maybe a stupid question but I don't find a consistent information on the maximum battery input voltage for the 32-bit boards.
    In the connection diagram on this website it is only mention "battery".

    Other websites mention 3s-5s LiPo or 3s-6s LiPo.

    So my question is can I connect a 6s Lipo without damaging the board?
  • there is different boards, you should look the board specific specifications.

    but unless you have motors that require high voltage, I would suggest using lower than 6S or a regulator.
  • Can you show a picture element. which must be verified specification (if you can maintain a 25.2 volt)
    I looked at the instrument for connection to the board (board is DYS) and offers a drop-down menu voltage. offers the option to choose 2S, 3S, 4S LIPO and 2S, 3S, 4S, 5S LiFe. If used lowering voltage regulator, what is the average current consumption.
    use motors BGM4114-100HS: www.dys.hk/ProductShow.asp?ID=93 . Camera is Sony hdr-cx330e - 250 gram.