Search - Brushless Gimbal Forum

I got a error message "serial data corrupted" on SimpleBGC GUI application with ver.2_70b0
Software version on the board is the same as GUI or newer?

by AlexMad March 27 Troubleshooting permalink
Where to buy a SimpleBGC 32bit in China
hello everyone!I am from China.I want to make a gombal that i can use UAV witch it.But i don‘t know where i can buy it in China.There are many company said their products Obtain genuine authorization from BaseCam.So what can i do to discern them.

by Azrael547 March 27 Getting started permalink
the new MODE_ANGLE_SHORTEST in API not working properly
I have 3 axes gimbal, and I use control just on pan and tilt axes while the roll axes is always horizontal, every thing was OK until the latest update (beta version 2.70_8), when I send command to gimbal to use mode MODE_ANGLE and stabilize on roll …

by Sami March 26 Software (ideas, feature requests, bug reports) permalink
Gimbal resets on 90 degrees tilt
I've build a 2-axis gimbal using 2208 motors and the SimpleBGC 32Bit Rev. B.
The stabilization works, but whenever I tilt the gimbal up- or downwards by around 90 degrees, it looses stabilization and gets into an infinite resetting loop. Most o…

by janis_blank March 24 Brushless gimbal mechanics permalink
The difference between DMX, DALI, 1-10V, phase control and other dimming modes?

Intelligent Lighting System
is changing the way the light behaves. Today, luminaires are smart and controllable, allowing the light to be set to the user’s preferred intensity and color, especially to suit their emotional state and improve the ambi…

by basilchristopher March 20 Serial API permalink
"SimpleBGC_GUI_2_69b4" GUI is Shutting down automatically after connecting to Extended long board
There are a couple of errors in the bat file: it should not be "Program Files (x86)" but just "Program Files", besides, the path should have jre1.8.0_231 (not jre1.8.0_321), so the final line of the bat file will be

@SET JAVA_E…

by 5Corners February 27 Software (ideas, feature requests, bug reports) permalink
I got a error message "serial data corrupted" on SimpleBGC GUI application with ver.2_70b0
I got a error message "serial data corrupted" on the SimpleBGC GUI application with ver.2_70b0 when the USB port is used to connect the SimpleBGC 32bit stabilization board to PC via serial port 4 with two different USB-type A cables. Can y…

by mikechen2023 February 20 Troubleshooting permalink
What are the communication advantages of Wi-Fi 7?
What is Wi-Fi 7 wireless technology? What are the communication advantages of Wi-Fi 7?

Learn about Wi-Fi 7 in one article, why do we need Wi-Fi 7?

It has only been two years since the release of Wi-Fi 6 wireless technology, and Wi-Fi 7 has followe…

by basilchristopher February 15 Getting started permalink
CAN_Driver specification request
I'll assume that is a no.

by ScoPi February 13 Electronics permalink
Yaw returns home on motor switch on....
Which I do not want it to do. I want it to start stabilising in the position it is in when toggling the motor power on/off, is the a way to change this "return to home" feature.

by designandinventltd February 12 Tuning brushless gimbal permalink
Missing caps due to carelessness
https://postimg.cc/LnMmJyTD missing caps highlighted in red

by Burei February 10 Electronics permalink
Missing caps due to carelessness
Hello,
Due to my carelessness my SBGC 3.7.1 extended in his shipping box without his static pouch fell on my rasp 4 GPIO and two caps are missing
I would like to know the type of caps and value of them to replace it (after some testing the trace are…

by Burei February 10 Electronics permalink
SimpleBGC_GUI_2_40 with SimpleBGC 8-bit shut down while connecting
UPD: fixed with JAVA downgrade

by CarMan February 9 Troubleshooting permalink
SimpleBGC_GUI_2_40 with SimpleBGC 8-bit shut down while connecting
Please help, everything worked OK for long time, now SimpleBGC_GUI shut down while connecting to COM port (admin mode tested)

Of course, some system updates might occur.

Is there a possibility to attach log?
here is part of it with errors:

#
# …

by CarMan February 9 Troubleshooting permalink
Home position offset
Hi

I have a camera system with PAN TILT assembly attached to it. The Camera System house the CAN_IMU and Stim210 as its companion IMU. The brushless motors used for YAW and PITCH movement are connected to CAN_DRV(1 and 2) and they are connected to …

by bhavya_vira January 30 Brushless gimbal mechanics permalink
Modbus RTU device wireless instead of wired connection

The Modbus RTU device wirelessly replaces the wired device is to connect the RS485 interface of the Modbus master and slave to a wireless data transmission station with a 485 interface. The communication depends entirely on the wireless data trans…

by basilchristopher January 29 Getting started permalink
Tarot GoPro 2 axis conversion issue
Hello,
We have a marine application where the standard Tarot gimbal controller will not calibrate on the moving boat. I have swapped this out for a Tiny version C Basecam controller.

The issue I have is that the gimbal is rock solid until I pitch i…

by MarineUAS January 22 Tuning brushless gimbal permalink
Can Basecam based gimbals be initiated on moving platforms? (i.e boat)
Hi there,
We are looking to build a camera gimbal which will require being powered up/initiated on a rocking boat. So far we have found the storm32 board to be too sensitive, and needs to be perfectly still to initialize, which wont be possible on a…

by dorado January 21 Getting started permalink
Follow Yaw sometimes gets a fixed offset
I did many tests, with different settings. Still the same issue. Can this be a bug? Any workaround you can think of?

by Jeff13 January 17 Software (ideas, feature requests, bug reports) permalink
YAW Axis Limited Range of Motion
Hello
I have a limited range of motion on my YAW axis while using an encoder . I made a video documenting this. The YouTube video did not work, so I uploaded in this Google drive instead:

https://drive.google.com/drive/folders/1hrm8Se3hd6ID3s33i…

by BlimpGuy January 2 Troubleshooting permalink

Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!

Sign In Apply for Membership

Powered by Vanilla