EN CN
GUI blue arrow on yaw graphic turning
-
The blue arrow in the GUI yaw indication very slowly rotates counter clockwise. The gimbal is steady and maintains yaw position, it's balanced and works well. It takes about 3 minutes or so for the arrow to make one full rotation back to N. Calibrations were carried out on startup as normal.
Anyone know why this is? Something disturbing the gyro? -
Ok, that seems to have stopped for now, but it will come back. Now I have a continuous very very slow yaw rotation clockwise. The compass does not move.
Again I don't think it will affect the actual use of the rig as it is such a slow turn. Maybe a few degrees per minute.
-
Do you have any RC connections? If you do switch them off just to check if the problems persist
Howdy, Stranger!
It looks like you're new here. If you want to get involved, click one of these buttons!