EN CN
BaseCam SimpleBGC Rev. C-Video twitch
-
When our mount equipment is in a low temperature environment (about -20 degrees Celsius), the mount will appear uncontrollable jitters after the drone is powered on, and this is still the case after we complete the IMU tri-temperature calibration. Can you give us some suggestions?
-
Hello,
Jitter may relate to the changes in mechanical system properties, which causes PID loop to become unstable. IMU temperature calibration may help only if you see drifting of angles, but not jitter.
As a workaround, you can decrease PID gains (P or D or 'gain') until jitter stops.
Howdy, Stranger!
It looks like you're new here. If you want to get involved, click one of these buttons!