Hi,

Let me start of mentioning that I fucked up. Big time.

Two weeks ago I bought a used CameTV Prodigy gimbal that seemed to work properly. Stupid as I am I did not read the effing manual and cocky as I am I always want to set up my gear from scratch. So I thought calibrating would be a good idea. (remember: without having read the manual)
So I put the gimbal on the stand, let it hang loose, connected the bluetooth app and just hit calibrate. Since then it went out of control.
Have tried the restoration guide as explained here: http://cametvblog.com/came-prodigy-restoration-guide-2-60-b4/ but even after writing the new base profile onto the gimbal it does not stop spinning, whirring and shocking.
Check the video's below.

https://drive.google.com/file/d/11OaO_iba3dX_iYcGgqPoix1yazfQqFGu/
https://drive.google.com/file/d/16gRmwWNaXHPOde7dboYQhNpDuSXYWfRd/

Any siggestions about what to do and get it back to normal?

My board version is 3.1.Firmware 2.60b4