Hi
I have looked everywhere and purchased a number of 4 pin connectors to try and find the right connector to the IMU as the connector that did come with the gimbal one of the wires has broken off. I have the 32 bit unit. Are they JST-SH or Molex or am I wrong on both counts? The 4 pin connector to the main board is smaller than the connector to the IMU. Some one mentioned they are the same as the ones on the LIPO's, the ones to my unit are not the same. Please help the gimbal has been out of action for over a month now. The only other way I considered was setting up my own connection system, I would rather not. Cheers