EN CN
Wanted: Name for cable Connector from Board -> Motor (white, 3 poles) - YAW/pitch/Roll
-
Hi,
today one of the 3 cables from the motors to board ripped off at the connector. When I tried to resolder the crimped cables I failed. Now the 3 cables do not fit anymore into the connector.
So now I am looking for a new cable or for the connectors with crimp parts to fix this.
Can you please tell me the name for this part? I cant find this kind of cable anywhere.
Its white, ca. 8mm wide and has 3 poles.
Here you can see the connector at the roll plug.
http://www.modellbau-tester.de/wp-content/uploads/2014/06/DYS-Smart3-3-Axis-GoPro-Gimbal-AlexMos-Control-Board-Test-3.jpg
Kind regards,
Tobi -
Well... maybe I will just solder it directly to the board. All motor connections.
Hope that wont damage any other electronics on the board. -
Can you measure the pitch centres between pins and source connectors from Farnell?
-
Can you measure the pitch centres between pins and source connectors from Farnell?
Howdy, Stranger!
It looks like you're new here. If you want to get involved, click one of these buttons!