Moti0nGFX

Building my first Gimbal
Hi @GLabs welcome, For suspension, it is important that the components are never really hanging, but are mounted upright for better decoupling. So the camera hangs under the drone but the load on the rubber feet or insulators comes as a pressure…

Comment by Moti0nGFX January 2022 permalink
Temperature Calibration...
no, i cant see it- Videos and Picture are not visible.

Comment by Moti0nGFX November 2021 permalink
20-30kg Gimbal Motor Recommendation
Hi, the controllers cannot control your RMD motors via the built-in drivers, for that you need the can boards from basecam. Best way ist to read the Manuel with all it specs. Do you only want to replace the eletronic or also the mechanics itself?T…

Comment by Moti0nGFX October 2021 permalink
Building my first Gimbal
@Abelmartinez90 nice to hear that your tests are successful and which board did you choose? I look forward to seeing your test & videos - greetings tom

Comment by Moti0nGFX August 2021 permalink
Building my first Gimbal
Hi Abelmartinez90, Ok that sounds good that you have basic experience, you also learn a lot by reading the manual. but I think before you decide on a board (form factor) you should consider your fixed points. Do you need endless rotating axes? - i…

Comment by Moti0nGFX June 2021 permalink
problem with the pitch
can you share a video with use? helps alot, Resson can be are stiffness, bad feedback, wrong balance, settings issue- you use encoder, if no, way more things that can be make your problem. tom

Comment by Moti0nGFX June 2021 permalink
Building my first Gimbal
Hi @ Abelmartinez90 Great idea/ project and presentation. *but the first question you should ask yourself is:* Do you want to learn with your project and develop your gimbal yourself from "level 0" - or to have fast and good results? …

Comment by Moti0nGFX June 2021 permalink
Rctimer gimbal
Hallo Barry, did you buy a licensed version of the PCB or one that may be a copy? Only original can be connected without problems. Install all drivers select the appropriate com port which board do you have?

Comment by Moti0nGFX March 2021 permalink
not the ordinary battery question
Hello, you can use any dc power supply that can provide the necessary current. Which board do you use? The new PCBs support a wider voltage range of 3-6s /11,1-22,0v.

Comment by Moti0nGFX March 2021 permalink
Looking for motors with large hollow shaft.
ya, that's right "I should be able to pull that small assembly off" - but you have to make sure that the new holder protects the bearing and keeps it in position. I have a simple noname slipring from example from iflight. Do you alr…

Comment by Moti0nGFX June 2020 permalink
Looking for motors with large hollow shaft.
Your "XING 8108 87KV Multi-rotor Brushless Motor" looks same like GBM8108-90". Iuse the second one witch clossed housing and 12mm shaft, i use slipring and self constucetd 3d print and aluminiumcnc parts combined with rls aksim2 for e…

Comment by Moti0nGFX June 2020 permalink
Looking for motors with large hollow shaft.
@Jackstar Moin, yes, the black cover is for holding a magnet, Orbis is a good choice and can also be installed as "hollowshaft", for this a magnet ring is fixed to a shaft. Now, I know why you need a 22mm shaft, but is it impractical to…

Comment by Moti0nGFX June 2020 permalink
Looking for motors with large hollow shaft.
Hi jackstar, i have already ordered at iflight and the products are also delivered - i don't know if they have a license for the boards. but i recommend to buy the board and motors separately for your project and use the mcu version directly,…

Comment by Moti0nGFX May 2020 permalink
3D_Printed motor cage with (too) much flex/movment (?)
wow, why the links are removed? watch?v=VqfAytKPyNU watch?v=-_RYELFKTq0 watch?v=6EcHSsCUkWw

Comment by Moti0nGFX February 2019 permalink
Optical Encoder with hollowshaft
Hi Aleksey, The reason why I opened the topic is that I found ABSOLUTE optical encoder - not cheap but exactly as I need it - even with SPI or CAN (open / lift) cominacation. one: http: //de.beisensors.com/absolut-multiturn-optische-drehgeber.html …

Comment by Moti0nGFX June 2018 permalink

Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!

About

Username: Moti0nGFX
Joined: June 2018
Visits: 7
Last Active: January 2022
Roles: Member