highfreq

external IMU chapter 18 & 19 of manual
Just to update the situation. I wrote here and directly to Alex, we opened a bug report but as of today i haven't had a single word back from basecam for my mavlink hanging problem. Only word from them is the post in this thread from 2 weeks ag…

Comment by highfreq October 2018 permalink
external IMU chapter 18 & 19 of manual
Has been 2 weeks since we have had this problem (mavlink hangs up after few seconds) and we really spent countless hours trying to understand where the problem is. We would appreciate very mauch a sign from Basecam, just to know if you can replicate…

Comment by highfreq September 2018 permalink
external IMU chapter 18 & 19 of manual
Hello, 2 weeks has gone by from our first post and bug report. We didn't have any feedback yet and we don't even know if it is our configuration problem or a bug in the basecam software. Can we please have some kind of assistance? At leas…

Comment by highfreq September 2018 permalink
external IMU chapter 18 & 19 of manual
Is there any news by any chance? Our gimbal is useless at the moment since it locks up on mavlink connection after few seconds. Please let us know if you could replicte the problem and working on a solution. Thank you, Corrado

Comment by highfreq September 2018 permalink
external IMU chapter 18 & 19 of manual
Hello, is there any news on this?

Comment by highfreq September 2018 permalink
external IMU chapter 18 & 19 of manual
We tested latest software beta and still experience hangs on mavlink, sometimes it stays up for up to a minute, sometimes it locks in few seconds. My collegue opened a bug report on the site, thanks for your help. Corrado

Comment by highfreq September 2018 permalink
external IMU chapter 18 & 19 of manual
Hello, problem gets worse. Mavlink connects and looks like it is working ok, than all of a sudden it hangs up and no data come trough the serial. It looks like it hangs whenever i try to send a mount command from the mission planner. Actually it lo…

Comment by highfreq September 2018 permalink
Mavlink problems in GPS mode
Problem solved on Beta 9. GREAT SERVICE THANK YOU VERY VERY MUCH!!!!!!! Corrado

Comment by highfreq May 2017 permalink
Copter 3.5 Mavlink Copter yaw follow
That can be done still using Mavlink? If so can you please elaborate a bit more on how to do it? And i think we will loose the "point camera here" option that is very useful. thanks, Corrado

Comment by highfreq May 2017 permalink
Copter 3.5 Mavlink Copter yaw follow
Than if we disable gimbal control in Arducopter we have yaw drifting and pithc-roll drifting during acceleration. I think something should be done to have gimball controlled by abslute angles in all 3 axis but still give RC control to user. It would…

Comment by highfreq May 2017 permalink
Copter 3.5 Mavlink Copter yaw follow
Have same problem here, it looks like it is impossible to disable follow mode for Yaw when connected in mavlink. Really need to disable it because when in RC_Targeting the follow mode makes the image go back and forth on Yaw axis when all zoomed in.…

Comment by highfreq May 2017 permalink
Wrong Yaw direction with with mavlink control (ardupilot)
Is it mandatory to set this parameter to these values and set the remaining to zero? Can we have some documentation or we just have to trial and error on this mavlink connection thing?

Comment by highfreq November 2016 permalink
Wrong Yaw direction with with mavlink control (ardupilot)
Thank you

Comment by highfreq October 2016 permalink
Wrong Yaw direction with with mavlink control (ardupilot)
Having the exact same problem, have my basecam connected to FC trough mavlink and both Yaw and Roll are reversed. It really puzzles me the lack of support and informations on the matter.

Comment by highfreq October 2016 permalink
Can Bus IMU not working
Support just answered that the current firmware doesn't support CANBUS imu yet. OBVIOUSLY IT IS NOT WRITTEN ANYWHERE ON THE SITE. I would have liked to know that the new imus were not supported by current firmware yet, BEFORE BUYING. Corrado…

Comment by highfreq October 2016 permalink
Can Bus IMU not working
No, connecting CAN IMU doesn't work, can imu does not work at all, system only works with onboard imu (wich i think is i2c). So to me it looks like I2C has higher priority. So what you are basicly saying is that you released a product without …

Comment by highfreq October 2016 permalink

Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!

About

Username: highfreq
Joined: October 2016
Visits: 9
Last Active: October 2018
Roles: Member