Thewitch

Second IMU sensor
Thanks! It has been just that i thought that the control board had and IMU ítself ( embedded)...but the thing is that in spite of not placíng the second IMU, the GUI gives you the opportunity of calibrating it...isnt it?

Comment by Thewitch December 2017 permalink
Tiny revision B board problem
SOLVED! The simplest and the strangest...Just changing computer. Thanks for everything!

Comment by Thewitch April 2017 permalink
Tiny revision B board problem
Hello, In fact, it is a USB connection problem. But I dont have any device connected. I have also reinstalled the VCP driver: https://www.basecamelectronics.com/files/drivers/CP210x_Windows_Drivers_6_7_2.zip. ANd I also have tested with VCP V1.4.0.…

Comment by Thewitch April 2017 permalink
Tiny revision B board problem
Hi there, I am also experiencing problems with the new tiny revision B board. It seems to have communication problems with the IMU sensor. I cannot read the real-time position of ANY of the three axis. The pitch,roll and Yaw indicators of the GUI mo…

Comment by Thewitch April 2017 permalink
Firmware Upgrade problem
Hi Shaddow77, I am experiencing the same problem from 2.56b7 to 2.b60b4. When I try to upgrade it I get the same problem. The worst is that now I cant even use the 2.56b7 version. The 32bit tiny does not communicate with the PC. Did you get a solu…

Comment by Thewitch March 2017 permalink

Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!

Sign In Apply for Membership

About

Username: Thewitch
Joined: June 2016
Visits: 0
Last Active: December 2017
Roles: Member

Powered by Vanilla