anton363

32bit + red scarlet yaw problem
Oooook. Follow mode workin as well:) many many thanks for the help again! I have more than 2 degrees but will play around with settings later. Im allready pretty happy with thos results. Tomorrow will make some very first test shoot.

Comment by anton363 April 2014 permalink
32bit + red scarlet yaw problem
here is a video of almost perfectly balanced gimbal. I think the gimbal is solid enough without the semicircle thing. And i also think its kinda impossible now to put it up and keep in balance as long as the battery holder does not let to bring the …

Comment by anton363 April 2014 permalink
32bit + red scarlet yaw problem
Ok. Finnaly i balanced it and its working!! I had to skip the semicircle support ring becouse i didnt find the way to attach it and balance the yaw at a time but it works good now on basic mode. I could set the yaw follow mode and its working as wel…

Comment by anton363 April 2014 permalink
32bit + red scarlet yaw problem
Aggree. Many thanks for the help. Without you i would still playing arround with pid. Tried alot of things. Hogh i, hogh p,.. Should say hundreds of combinations. Finnaly know whats wrong.

Comment by anton363 April 2014 permalink
32bit + red scarlet yaw problem
I removed the bearings untill the gimbal is not working 100%.

Comment by anton363 April 2014 permalink
32bit + red scarlet yaw problem
Thanks for the help!:) finnally understood whats wrong. I thought the yaw was well balanced but it was not! I just sow few vids how is the balanced yaw looks like and when they turn the right or left it still holding its position and mine is loosing…

Comment by anton363 April 2014 permalink
32bit + red scarlet yaw problem
Now i placed a 5d mark ii on it which is 5 times lighter than the red and gives absolutely the same result.

Comment by anton363 April 2014 permalink
32bit + red scarlet yaw problem
Tested few times again. Tried to balance it. It looks it balanced pretty well. Any direction i turn the gimbal it stays there. I also checked now whats happening after the gimbal makes this mistake what we are talking about. Right after the motors g…

Comment by anton363 April 2014 permalink
32bit + red scarlet yaw problem
The strange noise is the crappy grip of the handles. Actually i dont really know how to balance the yaw. I made it that way that if i turn it to the right (switched of gimbal) it stays there, if i turn it to the left it stays there aswell. With roll…

Comment by anton363 April 2014 permalink
32bit + red scarlet yaw problem
Angles were set by default: -45 and 45 to each. Tried to change but no effect. Here is the video! Many thanks for the help Garug!

Comment by anton363 April 2014 permalink
32bit + red scarlet yaw problem
Hi. I will make a video and place it. On linked video its the 0,24-0,28. Battery is placed above yaw, next to the handle. I tried to make ad compact as possible but need to leave some place for the red cables. Today evening i will be able to make so…

Comment by anton363 April 2014 permalink

Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!

About

Username: anton363
Joined: April 2014
Visits: 17
Last Active: June 2014
Roles: Member