jibeve

IMU Frame doesn't work, please help!!
Hi Have you checked the enable frame IMU in the advanced tab ?

Comment by jibeve November 2014 permalink
3dr module instead of bluetooth ?
i upgraded to the latest firmware and changed the baudrate to 57600 ; also increase the air speed of both 3dr modules : it's better ! less lags ! I've got the "serial data corrupted" message but it seems to work (can do the calib…

Comment by jibeve September 2014 permalink
Description of the app RMotion
Hi megaPRO, FIrst of all you'll have to check the baudrate of your 3dr robotics : download the 3dr configurator (works on Win8) plug the ground module( the usb one) and execute the configurator.By default, the 3dr module are configured with a…

Comment by jibeve September 2014 permalink
Update to Mobile App
And the support of Usb connection for serial tx/rx (so we can use 3dr module) ? Thanks

Comment by jibeve September 2014 permalink
Frame IMU greyed out
Hi Have you checked the enable frame IMU in the advanced tab ?

Comment by jibeve August 2014 permalink
Gyro Trust Not responding in Android App !
So we'll have to wait for another update !!

Comment by jibeve July 2014 permalink
Sensor board orientation?
Hi jim lee, Have a look at those videos : http://www.simplebgc.org/sensor.html

Comment by jibeve June 2014 permalink
Push button connection with joystick

Comment by jibeve June 2014 permalink
Push button connection with joystick
@jonathan311 : No ! The yellow wire (output of the joystick switch) goes to one lead of the resistor then from this lead another yelow wire goes to to alex mos button pin The red wire is on the other lead of the resistor and goes to the other alex…

Comment by jibeve June 2014 permalink
Push button connection with joystick

Comment by jibeve June 2014 permalink
manque de documentation

Comment by jibeve April 2014 permalink
manque de documentation
oups j'ai inversé le module bluetooth et l'imu ! désolé sinon le reste c'est bon !

Comment by jibeve April 2014 permalink
manque de documentation

Comment by jibeve April 2014 permalink
manque de documentation

Comment by jibeve April 2014 permalink
manque de documentation
c'est marqué BASCAM ELECTRONIQUE ou Basecam electronics ??? Si c'est Bascam électronique ca à l'air d'être une copie !! Pour uploader des photos sur le site, il faut passer par un site tiers hébergeant tes photos et joindre dans …

Comment by jibeve April 2014 permalink
Board type and info for joystick

Comment by jibeve April 2014 permalink
Many problems w/handheld rig
Yaw motor (200T) from rctimer legacy gimbal is 14 Poles.

Comment by jibeve April 2014 permalink

Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!

About

Username: jibeve
Joined: April 2014
Visits: 91
Last Active: April 2016
Roles: Member