wingbreaker

My 32-Bit Brushless Gimbal is working!
nice build

Comment by wingbreaker April 2014 permalink
My 32-Bit Brushless Gimbal is working!
Nice! what gimbal kit is that?

Comment by wingbreaker April 2014 permalink
Many problems w/handheld rig
what do you mean by power cycle. if you mean disconnect turn of then turn on before connectng, yes. yaw catches. but it will not engagfe right away when connected to gui. so it is difficult to tune yaw, luckily yaw is not the hardest of the 3 ax…

Comment by wingbreaker April 2014 permalink
Yaw not holding w/ 5802-200T
I don;t this board is just wacky. can't wait to try the 32 bit. here is test on new firmware.

Comment by wingbreaker April 2014 permalink
Yaw not holding w/ 5802-200T
only thing is why is there a delay in yaw on the bench hooked up to gui but when apply battery no usb the yaw activates immediately.

Comment by wingbreaker April 2014 permalink
Yaw not holding w/ 5802-200T
garug, i got my first working build in 2.4 7 i think the high sensitivity worked, not sure. thanks

Comment by wingbreaker April 2014 permalink
Yaw not holding w/ 5802-200T
i am trying everything it is just loose like there is no power. but in 2.3b5 works

Comment by wingbreaker April 2014 permalink
Yaw not holding w/ 5802-200T
But why would it hold fine on different firmware?

Comment by wingbreaker April 2014 permalink
LeViteZer Gimbal test videos.
when you shoot video plan your shots. Do the shot many takes then move on to another planned shot. The invention of gear like this is great but it still doesn't remove the need for basic production rules. 3-4 seconds max then edit.

Comment by wingbreaker April 2014 permalink
Yaw not holding w/ 5802-200T
i have same problem with same motor on any 2.4 firmware on 8 bit.

Comment by wingbreaker April 2014 permalink
Gimbal tuning problems
it sets values back to default but it is recommended as per manual and aerialpixls, not sure why. you can then load your settings that were saved afterwards just make sure your x and z is correct before you write.

Comment by wingbreaker April 2014 permalink
Gimbal tuning problems
I just went through this. If you have this set up: http://www.rctimer.com/product_1008.html Don't even bother with latest firmware. I'd go to 2.2. I'm using 2.3 but there are problems with it as well. 2.3b5 is not stable as it wil…

Comment by wingbreaker April 2014 permalink
Board type and info for joystick
can someone post a pic on how to wire a joystick with this board http://www.rctimer.com/syssite/home/shop/1/pictures/newsimg/1386222362.jpg i'm having a heck of a time figuring it out. nothing working.

Comment by wingbreaker April 2014 permalink
Many problems w/handheld rig
I got follow mode to work right in 2.3 but 2.4 yaw still is an issue. but I am happy with 2.3. maybe when I upgrade to 32 bit things will work out.

Comment by wingbreaker April 2014 permalink
Many problems w/handheld rig
Kikiju that option is in 2.4. I can get fallow mode to work in 2.4, but not 2.3. But in 2.4 I cannot get my yaw to work right at all.

Comment by wingbreaker April 2014 permalink
2.47b Yaw
this thing is so random. 2,3 b5 i can get super stable shot but if I rotate past so many diegrees it goes nuts. I can for the life of me get follow mode to work on pitch/roill. why is it so organic. it makes no sense at all. it is like rolling …

Comment by wingbreaker April 2014 permalink
2.47b Yaw
mainly yaw comes on when it wants to. can;t calibrate it because of this. but in 2.3b it works fine

Comment by wingbreaker April 2014 permalink
2.47b Yaw
everything is a symptom. can't get anything to be stable especially yaw. i've tried so much nothing works. recalibrated acc many times too.

Comment by wingbreaker April 2014 permalink
Many problems w/handheld rig
ooh says 12 poles

Comment by wingbreaker April 2014 permalink
Many problems w/handheld rig
hard to count installed. auto count says it is 14 but not sure why that'd be. I tried both both settings seem to work fine.

Comment by wingbreaker April 2014 permalink
Many problems w/handheld rig
Garug, informed me on rcgroups that his goes 360. so i have no clue, there is so much info out there about these boards, but not really enough and not organized.

Comment by wingbreaker April 2014 permalink
Many problems w/handheld rig
i read somewhere it was the nature of the alexmos board. so you can put just pitch on follow? im sure thats what I need to do. but does it effect stability in normal movement.? yeah, my yaw is perfectly balanced and when I go to far with pitch it …

Comment by wingbreaker April 2014 permalink
Many problems w/handheld rig
increased D on pitch and roll. Now my question is why does the gimbal shake out of control if I go past 30 degrees on the pitch? is it not meant to go more than 30 degrees?

Comment by wingbreaker April 2014 permalink
Many problems w/handheld rig
Boom, fixed it! near perfect now!

Comment by wingbreaker April 2014 permalink
Many problems w/handheld rig
I did some tweaking. I adjust Pitch to P-23, I - .01, D - 13, Power 180. It seemed to kill the up down movement. But now I have a rill issue. Again, I am thinking it is IMU related as everything I try does not fix it. My settings are pretty clo…

Comment by wingbreaker April 2014 permalink
Many problems w/handheld rig
seems a bit smoother

Comment by wingbreaker April 2014 permalink
Many problems w/handheld rig
ill try the auto gain idea though. hopefully that works. yeah i used low I settings but yaw just spun freely or accasionally got power but didn't respond to input or oscilated. is 2.4 a more stable firmware if you can get it to work?

Comment by wingbreaker April 2014 permalink
Many problems w/handheld rig
Here are specifics: rctimer legacy 4S 5208 75T roll, 5208 75T pitch, 200T Yaw Canon T4i with Tokina 11-16mm lens, perfectly balanced all around. So far my best settings on firmware 2.3 b5: http://static.rcgroups.net/forums/attachments/2/3/0/6/4/a66…

Comment by wingbreaker April 2014 permalink

Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!

About

Username: wingbreaker
Joined: April 2014
Visits: 55
Last Active: September 2014
Roles: Member