think

Simple BGC 2.2b2 Roll twitching jello on gopro gimbal FY680?
Garug are you running the board FC pinout to your Naza?

Comment by think May 2014 permalink
3 Axis Mini Alexmos Controller (from DYS)
thanks for posting and sharing your journey with this we can all share and learn

Comment by think April 2014 permalink
About Inertia and PID tuning
very nice and interesting - thanks for sharing

Comment by think April 2014 permalink
Problem with dys 3 axis gimbal for gopro
GOP - you need to config your sensor & motors correctly for starters - in BASIC tab for SENSOR AXIS right should be -Y In the motor configuration, run the AUTO and let it find if any reversals need to be applied - it will get the motor poles wr…

Comment by think April 2014 permalink
Accelerometer calibration
this video will explain the sensor axis configuration

Comment by think April 2014 permalink
New full guide from the BaseCam partner
thank you for sharing

Comment by think April 2014 permalink
virtual port not showing up
in windows device manager you need to see this UART installed as in this screen capture https://www.dropbox.com/s/0qmj4cgd9zpn0ot/UART.PNG

Comment by think April 2014 permalink
virtual port not showing up
ok I'm running the same OS as you - does the device show up in device manager when you connect the gimbal to your PC?

Comment by think April 2014 permalink
virtual port not showing up
if your not seeing any virtual ports the the issue is not the board but your PC side, your board from your description sounds like its working fine, as mine does the same when connecting the USB plug to the board. What is your operating system, and…

Comment by think April 2014 permalink
DYS 3 Axis Smart Gopro Gimbal
Cam here is a site pick what operating system you want drivers for and your done http://www.silabs.com/products/mcu/pages/usbtouartbridgevcpdrivers.aspx

Comment by think April 2014 permalink
Show us your configuration.
that's a great idea Chrisotech, could help establish a rough baseline for many

Comment by think March 2014 permalink
Yaw using a RC Radio
here's mine now using 2 channels http://www.youtube.com/watch?feature=player_embedded&v=VgSHrwyeOOw

Comment by think March 2014 permalink
Yaw using a RC Radio
Confirmed as Tasz correctly suggested, you can use the fc-roll or fc-pitch input or in my case I mapped the 3 way switch for the command assignment - thank you again Tasz for information

Comment by think March 2014 permalink
Yaw using a RC Radio
Thank you Tasz - I didn't know that you can use fc-roll or fc-pitch input for the yaw - I will try it and report back here :)

Comment by think March 2014 permalink
Yaw using a RC Radio
Frank as far as I know you can only use 2 channels - maybe when they include SBUS support you will be able to assign more channels to control PITCH,YAW,ROLL & MODE but for now only 2 :(

Comment by think March 2014 permalink
Yaw using a RC Radio
Frank you will need to swap the ROLL for YAW in the settings in the RC Settings tab: ROLL change to 'no input' YAW select 'RC ROLL'

Comment by think March 2014 permalink
Changing profiles mid flight
Sum PPM is for Spekrum and Turnigy receivers but not for Futaba is that right Garug? I am looking for a solution so that I can control YAW,PITCH and MODE via the receiver using Futaba is there any way of doing this on either the 2.3 or 2.4 SimpleBG…

Comment by think March 2014 permalink
Changing profiles mid flight
Garug, could you please give more details? are you using Futaba SBUS for the control of say YAW & PITCH? if so could you give me more details as I have tried and had no luck with the SimpleBCG 3 axis board on f/m 2.3

Comment by think March 2014 permalink
Changing profiles mid flight
nice work and thanks for sharing the details - I have been trying to work out how to assign the virtual channels with no luck - I thought that it was to be used with SBUS but I have had no luck, anyone else?

Comment by think February 2014 permalink
Problems in getting the RX to function
I'm using a DYS Smart gimbal with SimpleBGC running alexmos 2.3 with a Futaba 14SG and am controlling the PITCH and YAW. I am using a SBUS decoder that is programmed to use CH 10 & 11

Comment by think February 2014 permalink

Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!

About

Username: think
Joined: February 2014
Visits: 21
Last Active: May 2014
Roles: Member