ea_

GB85-1 resistance when plugged
Thanks Garug.

Comment by ea_ July 2016 permalink
GB85-1 resistance when plugged
Not shure about its "normal" behavior. Is there some tests to check?

Comment by ea_ July 2016 permalink
Mac Bluetooth issue
As explained in the manual (p.2) '' IMPORTANT NOTE: Bluetooth module must be configured at 115200 baud rate and Even parity (generally its not set by default, refer your module's user manual to find how to configure it). With these se…

Comment by ea_ August 2014 permalink
Update 32bit board firmware on mac
If you have installed the drivers for WINDOWS it should open a COM port that you choose in the GUI to update the FW. It worked really well for me in Parallels Desktop on OSX 10.6.

Comment by ea_ July 2014 permalink
Update 32bit board firmware on mac
It works with Parallels Desktop.

Comment by ea_ July 2014 permalink
Update 32bit board firmware on mac
It's all explained in the manual.

Comment by ea_ June 2014 permalink
Bluetooth 32bit
i'm using bluetooth with 2.40 b8 Firmware on my MBP and android tablet that needed to be ROOT to works with my HC-05.

Comment by ea_ June 2014 permalink
Bluetooth 32bit
It's working for me on HC-05 and 32bits boards on laptop and android device, it didn't work on android because it needed to be ROOT.

Comment by ea_ June 2014 permalink
Firmware 2.3b5 on 32bit board?
Good news !

Comment by ea_ June 2014 permalink
Improve PID settings to get the "MAGIC LOOK"
Absolutely i'm sorry,it was about Teo Morabito. Yes, i was running with him, but i think it could be better. A better flying feeling.

Comment by ea_ June 2014 permalink
Gui Does not recognise yaw motor
- Advanced TAB - Motors outputs - YAW: YAW ext.board

Comment by ea_ June 2014 permalink
USB batterie lipo
You should specify what board, what firmware, what GUI you use!!! In the manual 32 bit (page 2): "It is safe to connect USB and main power (battery) simultaneously. But be very careful to not reverse the polarity of the main battery, because in…

Comment by ea_ May 2014 permalink
32bit with 2 IMUs Yaw automatic alignment issue
Did you calibrate your 2nd imu ?

Comment by ea_ May 2014 permalink
Android App can't connect to Bluetooth HC-06? Blinking red light
Maybe it should be specified in the play store apps that it's only for 8bit.

Comment by ea_ May 2014 permalink
Fraem IMU i2c errors
Did you calibrate the frame IMU ?

Comment by ea_ May 2014 permalink
manque de documentation
Peut être votre vendeur serait plus apte à vous répondre.

Comment by ea_ April 2014 permalink
upgarde firmware
On Windows OS ?

Comment by ea_ April 2014 permalink
YAW skipping steps
It happens when i move fast and strong. Testing the edge. thanks for your help though

Comment by ea_ March 2014 permalink
YAW skipping steps
Yes it is.

Comment by ea_ March 2014 permalink
Roll doesn't stay level in follow mode when turning left or right.
The 40 - 20 tricks did the job for me on Held Held rig. Thanks Kikojiu.

Comment by ea_ March 2014 permalink
My card does not work anymore
Same here.

Comment by ea_ January 2014 permalink
Board type and info for joystick
FYI, RCTIMER official Store from Basecam, http://www.basecamelectronics.com/wheretobuy/

Comment by ea_ January 2014 permalink
Board type and info for joystick
SAme Board here asking the same question about plugging joystick.

Comment by ea_ January 2014 permalink

Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!

About

Username: ea_
Joined: December 2013
Visits: 262
Last Active: November 2017
Roles: Member