EN CN
Gimbal behaving strange - rolling by itself
-
Hi,
We're trying to understand this strange behaviour from our Foxtech Seeker gimbal with camera.
The gimbal is controlled by PWM from a microcontroller on yaw & pitch. However sometimes when we power up the gimbal it starts to roll back and forth (sometimes even getting stuck in a few degrees rolled left or right), the problem occurs about 1 in 5 flights.
We've tried tuning it the best we can, and as i said it works great 4/5 times.
There might be an obvious fix for this that we have missed, all input is appreciated!
https://youtu.be/kzNmXpqIL3U -
Don't know whats up with the video, can't post youtube link without it being embedded.
Try this link: http://tinyurl.com/y39z378h -
it might be caused due to any kind of fall maybe
-
I can't think of an "obvious fix" for that... You're controlling only yaw and pitch? There is nothing connected to the pins for roll command?
Howdy, Stranger!
It looks like you're new here. If you want to get involved, click one of these buttons!