EN CN
Yaw drift and more problem
-
Hello im tuning my lastre gimbal. Ita a 1 band gimbal Luke ronin-s.
I got 2 problema, the First is that the gimbal doesnt start to correct as soon ad i turn It in. But then about 20/30 seconda Ita start to workshop correctly.
Its occour non Every time but its like random.
The second problem its that the yaw axis is changing when i move the roll.
I Will post a video -
as you can see, the pitch is stable, the rool is stable too, but when i flex the handle on a side, the yaw start to turn...i have to correct with the joystick....i setted the outer angle tilt to -50°, no encoder installed
-
Hello,
Does your gimbal use Frame IMU sensor?
What firmware are you using? Try enable this option: http://ybex.com/d/tu0l25nenbgkflaf5qoinvc9eaa41ku7brcvxxwy.html -
Yes i have Imu frame, both calibrated. The fw is the last stable avaiable. Maybe 2.63 i think. Can be usefull to do frame tempo calibration? The frame Imu its in the samr box of the controller
Howdy, Stranger!
It looks like you're new here. If you want to get involved, click one of these buttons!