EN CN
Got a new motor today, question
-
What size wires do you need on a motor like this?
Are servo gauge adequate:?
http://mymobilemms.com/OFFTHEGRIDWATER.CA/BRUSHLESS-GIMBALS/Gimbal-Brushless-Motor/BGC-Encoder-Motor-PM4310-AS5048A-Encoder-Built-Inside
-
Normal servo wire is enough. If you have normal board and if that motor is above 10 ohms, it is less than 1.5 A current.
-
Thank you!
Howdy, Stranger!
It looks like you're new here. If you want to get involved, click one of these buttons!