Alexmos 32bit with RC?

Tschain

Hi,

I have a DYS Eagle Eye and want to get the Dual Operator running.

But I got no idea how to connect the RC Receiver with the Alexmos 32bit.

There are not the 3 Pins anymore, that connect with the RC module.

The casing says the connections, but it's only one wire for each- RCPitch, RCRoll and RCyaw. How is it suppost to work?
I have the Graupner GR-12 Receiver.

After a long time of research on google etc. with no possitiv results, I hope you can help me.
Thank you,
Peter

AOPEN3434

please read the manual !

Tschain

I read it thank you...

This is the board I got. http://www.ebay.de/itm/like/252195629679?lpid=106&chn=ps&ul_noapp=true

When I look at the MANUAL on page 52, then it is a different connection in the manual than on the board. That is what I am talking about.

I cannot simply connect the 3 pins from the RC with the board.

AOPEN3434

hello,
did you look at the 32 bit manual?
http://forum.basecamelectronics.com/index.php?p=/discussion/2360/alexmos-32bit-with-rc#Item_2

Tschain

Hi, yes I did.

If you compare the Pins from the 32bit board and the board I got, there are two different versions it seems like.

So I wonder if the board I got really is a genuine AlexMos?
Please open the Link, so you'd understand all the troulbe I'm coming from.

Instead of the 3 Pins each for the RC options, the board I got has only a 5 pin output, plus 2 for power.
There are no more options fur plugs.

Thank you for helping!

AOPEN3434

the pins should be labeled the same! the board in photo looks like standard 32bit BGC do you have a photo of the PCB?

Tschain

Here are two pics.
http://www.directupload.net/file/d/4399/7h7math8_jpg.htm
http://www.directupload.net/file/d/4399/ja5nxlza_jpg.htm

Howdy, Stranger!

Categories