EN CN
Camera moves when I tilt forward and back
-
The camera on my gimbal won't stay in position. When I tilt the gimbal forward the camera tilts up. When I tilt the gimbal backwards the camera tilts down.
-
Sounds like you have follow mode activated
-
It is set to follow mode because I want the yaw to follow....not the pitch. I have follow yaw on....and follow pitch disabled in the GUI
-
If you disactivate all follow related does the gimbal work normally?
-
It does not.
-
Then, something is wrong, but impossible to tell with the description you have provided.
Sounds like you should read the manual and perform the complete setup.
http://www.basecamelectronics.com/company/blog/show/?newsid=69 -
Think I figured it out but can't seam to correct it. When I disable pitch control "which is plugged into my Rc_roll on the gimbal control board" it works perfectly as it should but I no longer have control.
Howdy, Stranger!
It looks like you're new here. If you want to get involved, click one of these buttons!