EN CN
Filters Guide
  • LOO
    Hello everyone im trying to but filters on my gimbal but i cant find a guide how to translate the jitter from the real time data at hertz ...
    can somebody give me some simple directions how to do that i have read the manual but i cant understand it .
    thank you
  • Yu3u
    Hello,

    You should read carefully the manual. The information there is clear enough.

    Start from example -"Example: my gimbal works stable, but, when camera tilts downward 60 degrees, strong vibration occurs and does not allow to increase gain of PID" and so on.
  • LOO
    Yes I agree I have a problem with yaw axis when I move with the half speed the gimbal jitters what I have to write at filters from my real time data ? Example - or + 510 ? How can I translate it at hertz?
  • Yu3u
    Post your data from graphics RMS_ERR_* and FREQ_*
  • Fgriese
    in the last GUI, 2.42b7, didnt shoe FRQ_....... any tip? i update the 32bits board, ans still didnt show FREQ_....
  • tony1483
    Fgriese, just tick the "Recieve extended debug info" in monitoring tab
  • Garug
    This is one way to use the filters http://levitezer.com/styled-2/blog-2/index.html
Add a Comment