EN RU CN
Follow mode not working. 2.40b7
  • Hi There...:-) New here.

    So I've got my gimbal balanced well and I think I'm pretty close on the PID setting however for the life of me I can't figure out why follow mode is not working. not follow YAW not follow Pitch and Roll. I tried reading on other posts and other youtube videos but nothing seems to be solving it.

    There is also (perhaps unrelated) a very slight drift of the compass, which i assume has to do with a finer tuning of the PID.

    When I pick up my gimbal it's stable and corrects and movement with satisfactory performance. but no follow mode.
    My gimbal is a came 7000 with BGM5208-200T and two BGM5208-75. carrying a sony A7R with a canon 24L lens.

    The installed joystick works well on both pitch and roll axis. Also i'm on the new 2.40b7 on a mac.

    here's some screen grabs with my settings:

    Photo1

    Photo2

    Photo3

    Photo4

    Photo5

    Photo6

    Gimbal

    Any advice or help would be greatly appreciated

    Thx
    Ethan
  • Your Follow speed is zero. Try low value first, I am using 4.
  • thanks for your reply.

    Do you mean I should enter the value of 4 on the follow mode tab / speed ?

    Thx
  • Yes, at least some speed.
  • Great thanks again will try soon and report back.

    Cheers
  • Hi Garug,

    Just wanted to say thanks alot for your help. All is working well and the follow mode is great.

    Thx
    E