EN CN
YAW Problem
  • Frank
    Hi everyone.
    I'm mounted a DYS 3 axis GoPro gimbal to a cable camera system. I connected the RX Roll and RX Pitch and plugged them in to a DSM X receiver that is Bound with my DX4e radio. I went into the GUI software and assigned the radio channels and they work great. So I have Pitch and Roll working perfect. I have 2 more channels available and want to get the YAW to work with my radio, As far as the PID and power settings go I have that all working perfect and it's in follow mode. The gimbal works perfect. I could really use your help on getting the YAW to work with my radio.

    I am using a mini Alexmos board with version 2.3 b5 I believe.

    I look forward to your replies

    Cheers
    Frank
  • Diskettenlocher
    Hi Frank,
    do you really need RC control on the roll axis? If not, you can assign in the GUI the FC-Roll Input to the yaw axis. You can also use one of the FC Inputs, but you might need them for connecting a flight controller.
    Some more RC Inputs are on my wish list for next versions of the board...
    Regards,
    DL

Add a Comment