Hi, I need help in connecting the power line from the Lipo

reddddd

Hi guys! Sorry, Im a complete newbie and I would appreciate any help. I think I have the latest alexmos board (blue board) and the simplebgc 1.0 Connection Diagram is confusing. How do I connect the power? Does it just go to the mainboard? the lines in the diagram are intersecting. Im not sure If I will just cut a wire and tap power for the 3rd axis. I hope I can get help. I could also put in some pictures to clarify my problem. Thanks!

jhonalovej

hi red,
check these links
http://aerialpixels.com/support/stacking-3rd-axis-top-2-axis-alexmos-board-v2/
http://aerialpixels.com/support/alexmos-setup-guide/

I think you can use two lipo batteries if you want to.

Jhona

reddddd

Hi Jhona,

Thanks! Yes I think Ill do that but right now Im confused because my third axis board doesnt come with a "daughter-board" - the small board that sits on top of my 3rd axis controller. Is it because my board is different?

jhonalovej

what board are u using ?

jhonalovej

if you have such a board

http://www.unmannedtechshop.co.uk/media/catalog/product/cache/1/image/a653aa7e5b46b28d07955724936cfdbc/a/l/alex-mos-3axis-connection.jpg

you simply connect the 3rd axis 4pin jst connector to the main controller as shown in the diagram, be careful with the lid colors and u need to have a color diagram from the supplier like the above board. then u simply attach power cable from the main controller (+ -) signs to the battery.

dbeaty2

You have a choice of jumping + and - from the main board to the 3rd axis. Or running two + and - wires from the battery. Makes no diff.

reddddd

Thanks for the help guys! Its all set, the board was made by iFlight and I was able to get a diagram similar to the one you posted above. Thanks again!!

Howdy, Stranger!

Categories