EN CN
Sensor is not connected, Accelerometer is not calibrated
-
have both error messages. Sensor is not connected, accelerometer is not calibarated.
Which tab is the Calibrate ACC button at?
I tried calibrating by the menu button and by sending the calibrate acc from the drop down menu but did not work. -
Hello,
8bit boards - Basic tab -> "Sensor" area.
32bit board has a special "IMU calibration helper" on Hardware tab.
About 32bit board initial settings read here: "2. Step-by-step setup sequence" page 10 https://www.basecamelectronics.com/files/v3/SimpleBGC_32bit_manual_2_6x_eng.pdf -
Sensor is not connected means you CAM IMU is not connected or damaged ! accelerator is not calibrated means you have not performed basic IMU calibration!
Howdy, Stranger!
It looks like you're new here. If you want to get involved, click one of these buttons!