Sensor Not Connected Issue
  • I just bought one of the Basecam SimpleBGC 32 units and am getting an error message that the sensor is not connected. I've opened a ticket with Basecam support and will post the response I get from them. It appears nobody else has and this seems to be a re-occurring problem.
  • It sounds like it might be an issue with the I2C driver. Normally, if you don't have any sensors connected when you startup, the board defaults to the on-board IMU. I once wired up the I2C bus incorrectly on one of my boards and it screwed something up. I started getting the same message and couldn't get it to recover. Hopefully support has better news though... Let us know either way