EN CN
SimpleBGC 32bit Tiny I2C 2-IMU Set, Revision B interface with ADC
  • jordy55
    Simple BGC 32bit Tiny I2C is new board for me, I have already worked with arduino, raspberry pi but I wanted to interface ADC with this board but I am not aware of the instruction and is it possible to use Raspbian or Windows 10 OS or not ?
    providing a user manual for Simple BGC will be very helpful

    ADC - https://store.ncd.io/product/ads7828-analog-to-digital-converter-8-channel-12-bit-with-i2c-interface/
  • alexmosalexmos
    Hello!
    Gimbal controller board significantly differs from rPi or Arduino. It runs it's own firmware with very narrow task - gimbal stabilization, and you can not program it. You can only tune some parameters.
    User manual is here: http://www.basecamelectronics.com/files/v3/SimpleBGC_32bit_manual_2_6x_eng.pdf

    There are 3 ADC inputs for analog joystick connection. You do not need external ADC.
  • jordy55
    Hey Is there any reference code which will help me out to test some sensors with this controller board ? I wanted to monitor the readings of some industrial based sensors which gives the digital output of 0-10v but this board works on 0-5v input what is the best way to communicate the 0-10v output with 0-5v input so that this will effect to controller board?
  • alexmosalexmos
    This board is not a development board like Arduino where you have IDE and can write and upload your own code. The analog sensors it supports, are only joystick for gimbal control and potentiometers.
Add a Comment