EN CN
I2C erros occured!
  • willianakata
    COMFIGURE GIMBAL TOOL

    Restart Gimbal
    In this step, the gimbal will be prepared and restarted.


    check for battery….ok
    Enable all motors and restart the gimbal… ok
    Waiting for normal state… Please wait!

    State is strtMOTO

    I2C erros occured!
    For further help see the STorM32 wiki at
    Basic Controller Configuration - Quick Trouble Shooting

    press Cancel
  • willianakata
    I can not configure Gimbal! Can someone help me ??? Thank you!

    When I connect and connect the system without pc, it connects normally!
    Recognize the first and second IMU perfectly!
    After me and caliber like two IMUs and soon in email in COMFIGURE GIMBAL TOOL !!!
    I follow the steps .... Until this error message !!!

    Give it unrecognized IMU camera, no status appears ERR!
    I do not know what it can be ...
  • willianakata
    What I can tell you is that it shows this error ... not IMU1 (ERR) Just when I connect a battery, before connecting a battery ... it appears IMU 1 and IMU 2 OK. After connecting a battery, it features this ERR, IMU 1 camera.
Add a Comment