EN RU CN
Please Help its probably simple fix
  • I was tuning my brushless gimbal and I accidentally selected defaults. everything works fine except now my dji controller has only 2 settings on the pitch, basically I move slider on back of my controller to one direction and the pitch goes to its limit in that direction, then when I move the slide to the other end the gimble travels completely in that direction, anything in between does not work, its either all or nothing it seems like
  • Probably the Pitch is in speed mode, see RC settings and set to angle mode.

    But probably after seeing defaults, you should need to retune the PID at least and probably perform the basic setup also.