I have BGC-V3.15 2014-02-27 http://files.dangerd.org/pub/BGC/IMG_20141109_191121.jpg In manual (XLoader): Leave all other settings at default (baud is 115200, device is "SimpleBGC"). I don't have SimpleBGC in device list, only: Duemilanove/Nano(ATmega328) and Uno(ATmega328) After hitting upload, Xloader stucks with Uploading...
Also link for Xloader on this site is dead.
Now controller is bricked. Any other manual how can i recover it?
Hi, Try to download (8 bit) GUI version: 2.40b7 + firmware with it -Connect the board to your PC via USB. Red light has to light up on the board. -Start GUI and do the following steps: Select appropriate COM port. Do not press button "Connect". Open TAB "Firmware Upgrade" Specify location of Firmware HEX file -> " SimpleBGC_2_40b7.enc.hex" Press button "Flash". Wait until uploading to be finished. Unplug USB ...and then plug again
Remember: if Your board does not have any flash pins then you won't be able to flash to newest firmware due to flash pins that are needed in re-write process....so stay with that older version