EN CN
Auto tuning doesn´t work
-
Auto tuning doesn´t work for me. Press auto tune and the gimbal doesn´t stop moving. :-(
-
It takes up-to 5 minutes. Try starting from zero values (i.e. not from the existing) and performing it for one axis at the time. also the gimbal (handle) should be held about stationary, so not moving much during the calibration.
-
Thanks Garug. Will try it but the yaw axis turns 360 º don´t know why. And because it is connected via USB it ends up being a problem.
Howdy, Stranger!
It looks like you're new here. If you want to get involved, click one of these buttons!