EN CN
Joystick issue
-
Hey guys,
when using a joystick it happens that if I start tilting then the gimbal will also pan and roll a bit, so if for example I make a 180° tilt I can get like 6-7° in rolling and panning. Sensor just shows tilt so nor roll nor yaw are moving. The weird thing is that I don't feel the same if I tilt through follow mode! Cheap joystick? Bad settings in RC setting? Changing values didn't change anything. I also checked frame which seems to have orthogonal components. Any ideas?
Thanks!
-
Is your gimbal in level when you pan? The Joystick does not pan the Yaw axis, but the camera.
-
Well actually i disabled joystick pan but yes it stays in level
-
Have you done the auto offset in follow mode. Also important that sensor(s) are well calibrated and correctly placed (parallel to gimbal axis) and that gimbal axis are exactly 90 degrees to each other. Any of these could cause all axis moving, when one is moved.
-
Ok thanks! I'll check all this!
Howdy, Stranger!
It looks like you're new here. If you want to get involved, click one of these buttons!