EN CN
IMU Mounting options
  • natevolk
    Can you mount the IMU's on a 32bit board with the Z axis pointing towards the operator?
    I have both of mine pointed this way, but the frame IMU says that everything is 45 degrees off in the GUI, although the frame is level and the camera IMU is ok.
  • Garug
    So have you configured the IMU axis top and right direction correctly on GUI and ACC calibrated it on flat level components (Z) facing up?
  • natevolk
    I have. I tried again from scratch tonight. I disabled the frame IMU and it works like my 8 bit board. Once I enable the frame IMU, it goes nuts. I'm 99% sure I've got the axes correct on it.... Thanks for the help!
  • Marian
    Try to swap the pitch and roll motor ports. I know it sound odd but it is worth trying. It worked unexplainedly on mine.
  • natevolk
    Thanks, tried swapping motors, no luck. Is there a way to test the IMU's to see if they are good or not? Maybe I have a faulty frame IMU?
  • Garug
    Look the real time data, or the indicators on the right of the GUI. Do they react according the IMU movements.
Add a Comment